Home Security Hub

The home security system hub is a in-home controller for your security alarm system. It can communicate with your security sensors like PIR motion sensors, detectors like smoke detector, panic alarm button to quickly activate alarm system, so as to establish a holistic network. You could use a mobile app to arm/disarm and remotely control your home security system.

The primary reason is to ensure reliable, uninterrupted security coverage for the home, even in the face of potential connectivity issues.

If WiFi or Ethernet service is spotty or go down, especially during power outages or network disruptions, the home security Hub will automatically switches to a backup Cellular connection to ensure continues monitoring and responding, without any gaps in protection.

Plus, burglars often try to disable security systems by cutting phone/internet lines - but a cellular connection thwarts this tactic. The hub also has an 8-hour battery backup, so it can keep functioning even when the power is out.

A smart home bridge can help integrate your existing devices into a new network or ecosystem. For example, a Zigbee to Matter bridge could connect devices using Zigbee protocol to the a Matter Fabric. Also, a Bluetooth to WiFi bridge enables users to access BLE devices via the Internet from any location. While a smart security hub connect and manages all smart device in your home.

You can manage your security alarms and home automation with a smart home security hub, whether you are at home or away from home. It enables you to DIY and install self-monitoring systems in your house, bringing round-the-clock protection to the next level. Buy DIY home automation and security system kits here.

Yes, when adding the home security smart hub into the system, you can manually enter the serial number to add it. The serial number is located at the bottom of smart hub, or you can find it at the back of the hub. Welcome to know more how to set up home security smart hub at this quick start guide.

The adding time for the home security system hub is 5 minutes, please make sure you add all the devices within 5 mins, you can find the all 3 LED lights flash green light alternately, which means it is in pairing mode. Also,

1. Please make sure home security system hub power is on;

2. Make sure the home security system hub is connected to the internet;

3. You can reboot the home security system hub and try it again, if you cannot add the devices, please contact us.

Our smart home security hub supported both wired and wireless connection, you can use WiFi and LTE connection. We recommend you use all 3 connection methods to ensure the stability of the connection.

You can use the disarm button the turn the flashing light off.

The smart security hub only supports connection to a 2.4 GHz Wi-Fi router.

Before inserting the SIM card into the home security hub, please make sure you are inserting it in the correct direction and also ensure SIM card PIN is disabled on your phone. Also make sure you have enough balance in your SIM card account.